











Tungsten Cylinder Counterweights, also known as carbide balls, refer to balls or beads made of tungsten carbide. The production process mainly includes compound preparation, molding, sintering, grinding, and quality inspection. The quality control of each process will affect the Tungsten Cylinder Counterweights and thus the performance and quality stability of the final product. Carbide balls have high hardness, high wear resistance, good chemical stability, and thermal stability. They are mainly used in petrochemical valve balls, special bearing balls, measuring head balls for testing instruments, power tools, and mold balls. They are widely used in Precision machinery, aerospace, military, petrochemical, and other fields.
Here is the content list:
l What are Tungsten Cylinder Counterweights?
l How do Tungsten Cylinder Counterweights work?
l What are the advantages of Tungsten Cylinder Counterweights?
Tungsten Cylinder Counterweights sometimes referred to simply as crankshafts, are the main rotating parts of the engine, which can undertake the up-and-down (reciprocating) movement of the connecting rods into cyclic (rotating) movements, and are one of the most important parts of the engine. Tungsten Cylinder Counterweights have two important parts: the main journal and the connecting rod journal: the main journal is installed on the cylinder block, the connecting rod journal is connected with the big end hole of the connecting rod, and the small end of the connecting rod is connected with the cylinder piston, which is a typical crank Slider mechanism. The lubrication of the crankshaft mainly refers to the lubrication of the bearing bush of the rocker arm and the lubrication of the fixed points at both ends. The power source of the engine when the crankshaft rotates. It is also the source of power for the entire mechanical system.
The Tungsten Cylinder Counterweights can connect the piston and the crankshaft with a connecting rod. When the piston moves up and down, the connecting rod makes a circular motion, and then the Tungsten Cylinder Counterweights start to rotate, driving the flywheel on the crankshaft to transmit the force.
The engines of Tungsten Cylinder Counterweights use counterweights to keep each piston reciprocating and connecting rods balanced. These counterweights are Tungsten Cylinder Counterweights. Lead is inexpensive, but has a lower density than Tungsten Cylinders. It is toxic, and causes environmental pollution. For steel, the Tungsten Counterweight is twice as dense. Therefore, Tungsten Counterweight is more suitable for crankshafts than other materials. Tungsten Cylinder Counterweights have the following advantages: high density, small size, high hardness, high wear resistance, good corrosion resistance, impact resistance, high melting point, high-temperature resistance, and non-toxic and non-polluting.
Since Tungsten Cylinder Counterweights have the advantages mentioned above, Tungsten Cylinder Counterweights can be used in engines on aircraft, ships, and spaceships. Today, tungsten alloy crankshafts are widely used in high-performance racing engines.
Our company philosophy is "integrity, hard work, quality, responsibility", that is, quality first, customer first, first-class service, integrity-based, smile to meet challenges, and sincerely serve every customer. For more questions about Tungsten Cylinder Counterweights, please contact us. Years of accumulated R&D and production experience, to provide you with more product services and technical support! Our official website is https://www.7jinxin.com/.
Advantages Of Tungsten Carbide Strips
Tunsgten cemented carbide strips is mainly made of WC (tungsten carbide) and Co (cobalt )mixed by metallurgical method through powder making, ball milling, pressing and sintering, the main alloy composition is WC and Co, the composition content of WC and Co in cemented carbide strips for different applications is not the same, the use range is extremely wide.
Cemented carbide strips are named after the rectangular shape of the slab (or square), also known as carbide long plate.
Advantages of tungsten carbide strips is as below:
1. High purity raw material with little impurity content and more stable physical properties.
2. Using spray drying technology, the material is protected by high purity nitrogen gas under fully sealed conditions, which effectively reduces the possibility of oxygenation during the preparation of the mixture, with better purity and less dirtying of the material.
3. Uniform density: 300Mpa isostatic press is used for pressing, effectively eliminating the generation of pressing defects, and the density of the blank is more uniform.
4. Excellent denseness, excellent strength and hardness indexes: the adoption of ship low-pressure sintering technology effectively eliminates the pores inside the long bar, and the quality is more stable.
5. Using deep cooling treatment technology, the internal metallographic organization of the long bar can be improved, and the internal stress can be greatly eliminated to avoid cracks during the cutting and forming process of the product.
Zhuzhou Jinxin specializes in the production and processing of custom cemented carbide molds, is old enterprises more than 20 years. It is a national high-tech enterprises, for the production and processing of products strictly implement national standards.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com
How to store the carbide roller ring?
Tungsten carbide roller rings are indispensable parts in the process of high speed wire rod production, but also the account for most of the cost, so in order to reduce the cost, so the purchase of cemented carbide roll rings of strict quality control, save the management also need to be careful in using, because of the particularity of roll ring material at the same time, the daily management of roll ring has very strict requirements, placement, maintenance. Changsha Jingxin cemented carbide roller ring quality is excellent, after the purchase of the use of how to save management? Changsha Jingxin has suggestions!
1. Establish a roll ring management system and a management box specially for storage of roll rings. The management box is equipped with a roll ring management tracking card, so that every link of roll rings can be checked from the entry into the factory to the online use, so as to meet the actual production needs.
2. The storage area of the roll ring management box shall be delimited. Other process parts and tools shall not be stored.
3. The surface of the hard alloy roll ring management box is sprayed with the specifications of each product, so that it matches with the roll ring inside the box to ensure sufficient quantity.
This method is not necessarily suitable for all occasions, the final storage or the specific situation of the customer to formulate, if you have questions or want to find a way to this problem, you can consult Changsha Jingxin for customer service.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com
Classification of carbide roll
Tungsten carbide rolls are one of the materials in great demand in steel mills, and it is mainly divided into four categories: high-speed wire rolls, new generation of high-speed wire hot rolling rolls, new generation of high-speed wire review rolls, and cold-rolled three-dimensional rolls.
The carbide rolls produced by Zhuzhou Jinxin Cemented Carbide Company have better thermal conductivity, higher wear resistance and corrosion resistance, and good general performance, which obviously reduces the depth and width of thermal cracks in the rolling groove during rolling and reduces the risk of roll shattering.
The new generation of high-speed wire hot rolling rolls has higher impact resistance, thermal fatigue resistance and high wear resistance compared with high-speed wire hot rolling rolls, and is suitable for high-speed wire rolling at speeds over 100 m/s.
The new generation of high-speed wire rod composite rolls can significantly reduce the number of slot and roll changes, reduce labor intensity, improve labor productivity, improve the surface quality of the rolled material and the percentage of finished material in the front frame of rebar and bar mills, thus obtaining significant economic benefits.
Cold-rolled ribbed steel bars rolled with cold-rolled three-dimensional rolls have beautiful surface appearance, high dimensional accuracy, clear rib marks, and change the performance of ribbed steel bars to improve their strength. The volume of one rolling is (800-1500 tons), which is (20-50) times higher than that of ordinary tool steel material. It can be repeatedly resharpened and used, which greatly reduces the cost and significantly improves the effectiveness and efficiency.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com
What Is Technical requirements of Carbide indexable inserts?
1. Technical requirements forcarbide indexable inserts with round holes, without holes and countersunk holes
Straightness of the back of the insert, concave inward no more than 0.05mm, convex outward no more than 0.03mm.
The straightness of the blade base, with round hole and no hole blade only allowed to concave inward, its value is not more than 0.05mm; sink hole blade only allowed to concave inward, its value is not more than 0.03mm.
The surface of the blade shall not have defects harmful to the use, and the edge part shall not have fallen off; the non-working part shall not have fallen off by more than 0.3mm.
The main performance and organization of the insert shall conform to the provisions of YB849-75 "carbide grade" or related standards.
Blade section organization should be uniform and consistent, there shall be no defects harmful to the use.
Any newly developed or introduced new material should be higher than YB849-75 standard and conform to the enterprise recommended value.
2. carbide indexable milling cutter blade technical requirements
Inserts base straightness, only allowed to concave inward, A grade is not more than 0.005mm; C grade is not more than 0.01mm; K grade and E grade is not more than 0.02mm.
The surface of the blade shall not have defects harmful to use, and the edge part shall not have fallen off the edge and corner; the non-working part shall not be more than 0.3mm.
The main performance and organization of the insert shall conform to the provisions of YB849-75 "carbide grade" or related standards.
Inserts section organization should be uniform and consistent, there should be no defects harmful to the use.
3. Carbide indexable inserts other common technical skills
All inserts with surface chemical coating (CVD), including turning inserts, milling inserts or other carbide inserts, must be rounded before coating, and the radius of the edge arc γε≤5µm.
If the indexable inserts are not marked with back angle tolerance, the allowable deviation is ±1°; in addition, the allowable deviation is ±0.1mm for tip radius γε≤1.0mm and ±0.15mm for γεr>1.0~2.0mm.
Indexable inserts products, in each insert should be engraved, etched with identifiable features of the logo, features such as: material category or coating code.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com
What Is The Main Uses Of The Tungsten Alloy
Tungsten Alloy generally are refractory metal, which have two-phase composits consist of W-Ni-Fe or W-Ni-Cu or even W-Ni-Cu-Fe. What is the main uses of tungsten alloy products? Let's see below.
1) Sporting goods series products.
The benchmark of professional tungsten darts
Tungsten fishing pendant series: bullet type, teardrop type, round tube type, half-drop type, cylindrical with hole type.
Tungsten beads, tungsten balls series: φ1.5mm -φ10mm accuracy ±0.01mm, used for fish pendant counterweight, bullet, medical instrument counterweight, shotgun pellet; φ0.1mm-φ10mm accuracy ±0.1mm, used for oil drilling balance, shotgun pellet.
2)Counterweight products
High-density tungsten-based alloy counterweight series: balancing hammer for machinery; flying hammer; oil drilling counterweight; dart bar; golf ball counterweight; racing car counterweight; cell phone and game machine oscillator; aerospace gyroscope; watch pendulum; balancing counterweight ball; anti-vibration knife bar.
3)Medical equipment
Medical tungsten alloy radiation shielding material series: 1, tungsten alloy grating blade; 2, tungsten alloy protection canister - for medical radioactive shielding wall; shielding syringe - for medical radioactive liquid shielding; tungsten alloy memory -- for storage of radioactive materials in tanks, boxes and other containers. 3、Collimator - for medical linear gas pedal and nuclear technology applications in the tungsten alloy series of detection container system collimator; Co60 shielding of other radiation.
4) Electrical materials
Electrodes for electric spark processing and resistance welding; high specific gravity electrical contacts, contacts in air circuit breakers.
5)Military products: Armor-piercing bullets; submunitions, balls, rods, square grains, cylinders, other tungsten alloy electric upsetting blocks, tungsten alloy in nuclear technology applications.
6) High specific gravity alloy heat sink material
Due to the high temperature resistance and good heat dissipation performance, high specific gravity tungsten alloy materials are now being used in large quantities as heat sink materials in the electronics industry, such as various types of computer CPU.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com
Why More And More People Choose Tungsten Fishing Sinker?
The fishing sinker is used to increase the diving power, anchoring power, and throwing speed of the bait. The fishing sinker can be as small as 1/32oz for shallow water, and even smaller for flying fish. Or up to ten ounces for deep sea fishing. They can come in a variety of shapes, and environmental concerns are a major concern when choosing fishing sinker materials.
A fishing sinker is usually made of lead with a hook and is usually covered with a soft material to attract fish. In recent years, however, tungsten alloys have become increasingly used as fishing sinkers.
The high specific gravity tungsten alloy with clean metal as raw material has heavy density(>18g/cc), small volume, strong wind resistance, light water entry and fast sinking, so it is a good substitute product for lead sinker.
Changsha Jingxin provides fishing sinkers, tungsten ball, tungsten weight, various shapes such as: drop shape, bullet shape, fish mouth shape, ball shape, etc. Tungsten alloy is also used in other products for fishing, such as carbide cutters for cutting high power fishing lines.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com
Why we should choose tungsten alloy counterweight for the crane?
What is a crane? Does the crane still need counterweight? Why choose tungsten alloy counterweight block? See this title, you must have doubts, here we will see the answer one by one.
Crane is also derrick, mainly consists of power device and support two parts, in the lifting time, the counterweight is very important, the counterweight is mainly to maintain the balance of the block. Its weight is generally added according to the strength of the car itself, too heavy, too light have disadvantages. If it is too heavy, it is likely to cause damage to the strength of the car when lifting the weight; If it is too light, it is likely to roll over. In order to make the car more versatile, some large tonnage crane balance block is removable, when lifting small tonnage materials, the car can be hung less or no balance block. However, when hoisting large tonnage items, the balance block must be fully hung, and even the excess device must be added to prevent the occurrence of overturned, resulting in casualties and damage to goods.
When you look at this, you may think that other material counterweights can also be available, as long as the weight is up to the standard. Why choose expensive tungsten alloy counterweights? That is because of the high density of tungsten alloy, corrosion resistance and oxidation resistance. The high specific gravity tungsten alloy as the key raw material, tungsten alloy density, so as to achieve the purpose of small volume and large weight, high flexibility, long service life.
Any interested items please feel free to contact:
Contact: Julia
Mob:+8618073319589
Wechat:18073319589
Whatsapp/Skype: +8618073319589
E-mail:sales06@jxcarbide.com