Home » Tungsten Carbide » Tungsten Carbide Strip » Top Quality Tungsten Carbide Plates YG6 YG8 Tungsten Carbide Strips
Share to:

Top Quality Tungsten Carbide Plates YG6 YG8 Tungsten Carbide Strips

Tunsgten carbide strips is mainly made of WC (tungsten carbide) and Co (cobalt )mixed by metallurgical method through powder making, ball milling, pressing and sintering, the main alloy composition is WC and Co, the composition content of WC and Co in cemented carbide strips for different applications is not the same, the use range is extremely wide.

Availability:
Quantity:
  • carbide strips
  • Jinxin

Product Description

Tunsgten carbide strips is mainly made of WC (tungsten carbide) and Co (cobalt )mixed by metallurgical method through powder making, ball milling, pressing and sintering, the main alloy composition is WC and Co, the composition content of WC and Co in cemented carbide strips for different applications is not the same, the use range is extremely wide.


The production process of carbide strips is as below:

Powder making→formulation according to the requirements of the use→by wet grinding→mixing→crushing→drying→sieving→then adding forming agent→drying again→sieving to make the mixture→granulating→ pressing→forming→low-pressure sintering→forming (blank)→flaw inspection→packaging→warehousing.





BRAND,PERFORMANCE AND APPLICATION


Grade

ISO
Density
Hardnes
T.R.S

Performance & application recommended
g/cm³
HRA
MPa
YG6
K10
14.90
90.5
2400
Good wear resistance, suitable for machining hard wood, raw wood, aluminum section bar, brass rod and cast iron.
YG6A
K10
14.85
92.5
2000
Wear resistance higher than YG6, suitable for machining hard wood, raw wood, aluminum section bar, brass rod and cast iron.
YG8
K20
14.70
89.8
2800
High wear and impact resistance,suitable for machining dry wood, soft wood and non-ferrous metal section bar.

YS2T

K30

14.25

92

2400
Fine grain alloy, with high wear resistance, bending strength,bonding resistance and thermal strength. It is suitable for machining refractory alloys, stainless steel, high manganese steel, etc.
YL10.2
K30
14.45
91.8
3000
Wear resistance and strength comparatively higher,suitable for machining cast iron,non-ferrous metal and non-metallid materials.



Size Specification for Tungsten Carbide Strips

H903ef3681e084cb79d5d2dedb07853ede

If you need tungsten carbide strips, please advise the length, width and thickness.


Application range of Cemented Carbide plate/strips:


Used to make blanking dies. Used to make high-speed punching dies and multi-station progressive dies for punching and cutting copper, aluminum, stainless steel, cold rolled sheet, EI sheet, silicon steel sheet, hardware, standard parts, upper and lower punches and other thin sheets


Used to make wear-resistant tools. Such as tools for woodworking industry, plastic crushing tools, etc.


Used to make high temperature resistant parts, wear resistant parts, and anti-shielding parts. Such as the guide rails of machine tools, anti-theft reinforcement plates of automatic teller machines, etc.


Used to make corrosion-resistant parts for the chemical industry.


Used for radiation and corrosion resistant materials for medical equipment. The performance of different grades of cemented carbide is not the same, and the use should be specifically based on the use of the appropriate material to choose the grade of cemented carbide.


Zhuzhou Jinxin has a large stocking capacity and storage warehouse, and can provide large quantities of tungsten steel raw materials and some finished products in stock.











Get A Free Quote

Contact us
ABOUT US
Taking the construction group company as the development blueprint, Jingxin Group will focus on the development of cemented carbide, mining machinery, engineering tools, auto parts, new energy, and leisure sports equipment industries.

QUICK LINKS

PRODUCT

NEWSLETTER

 sales06@jxcarbide.com
 +86-18073319589
 +86-731-22588488
 
 Copyrights 2021Changsha Jingxin Cemented Carbide Co., Ltd. All rights reserved.     Supported  by  leadong.com