Hot Sale Tungsten Carbide M6 5.3mm Flat Hot Melt Flow Drill - Buy 5.3mm flow drill, hot melt drilling, flat flow drill Product on Zhuzhou Jingxin Cemented Carbide Co., Ltd.

Home » Tungsten Carbide » Tungsten Carbide Cutting Tools » Carbide Friction Drill » Hot Sale Tungsten Carbide M6 5.3mm Flat Hot Melt Flow Drill

Model:
carbide friction drill
Brand:
Jinxin

Product Description

Product Description

Hot melt drill description

The hot melt drill is a tapered tool made of special tungsten carbide. It uses high speed rotation and high axial pressure to generate a large amount of frictional heat on a thin tube or plate, where the material at the point of processing is in a "super plastic" state and the tool displaces and shapes this part of the material to form a bushing. The height of the bushing can be 3-4 times the thickness of the original workpiece.

Hot melt drill is widely used in automobiles, motorcycles, construction, decoration, machine tools, machinery, aerospace electronics, electrical appliances, furniture, waterways, shipbuilding and automation equipment and other aspects.

Classification of hot melt drill

1.According to the surface requirements of the workpiece, the hot melt drill bit can be divided into round hot melt drill and flat hot melt drill.

round flat drills

Round hot melt drill

The hot melt drill penetrates the workpiece and forms a convex ring on the surface of the workpiece while stretching the forming bushing. This boss is suitable for screw seal or nut washer.

Flat hot melt drill

The middle step of the hot melt bit is grinded with the cutting edge of a milling cutter. When the hot melt drill penetrates the workpiece to form a bushing, the convex ring of the workpiece surface is cut off (milling and chamfering), so that the surface of the workpiece is smooth.

2. According to the thickness of the workpiece, hot melt drill is divided into short hot melt drill and long hot melt drill.

long and short drill

Short drill: Used for commonly use thin-walled parts. Suitable for penetrating workpiece thicknesses of 0.8mm-3mm. The cylindrical part of the drill is short, and the hole after extrusion into a conical shape can make the tapping strength stronger.

Longer drill: Used for thicker workpieces or when straight holes need to be processed. It is suitable for tapping workpieces with a thickness of 3-12mm. The cylindrical part of the drill bit is longer and the hole formed after extrusion is longer.