Tunsgten carbide strips is mainly made of WC (tungsten carbide) and Co (cobalt )mixed by metallurgical method through powder making, ball milling, pressing and sintering, the main alloy composition is WC and Co, the composition content of WC and Co in cemented carbide strips for different applications is not the same, the use range is extremely wide.
The production process of carbide strips is as below:
Powder making→formulation according to the requirements of the use→by wet grinding→mixing→crushing→drying→sieving→then adding forming agent→drying again→sieving to make the mixture→granulating→ pressing→forming→low-pressure sintering→forming (blank)→flaw inspection→packaging→warehousing.
BRAND,PERFORMANCE AND APPLICATION
Grade | ISO | Density | Hardnes | T.R.S | Performance & application recommended | |||
g/cm⊃3; | HRA | MPa | ||||||
YG6 | K10 | 14.90 | 90.5 | 2400 | Good wear resistance, suitable for machining hard wood, raw wood, aluminum section bar, brass rod and cast iron. | |||
YG6A | K10 | 14.85 | 92.5 | 2000 | Wear resistance higher than YG6, suitable for machining hard wood, raw wood, aluminum section bar, brass rod and cast iron. | |||
YG8 | K20 | 14.70 | 89.8 | 2800 | High wear and impact resistance,suitable for machining dry wood, soft wood and non-ferrous metal section bar. | |||
YS2T | K30 | 14.25 | 92 | 2400 | Fine grain alloy, with high wear resistance, bending strength,bonding resistance and thermal strength. It is suitable for machining refractory alloys, stainless steel, high manganese steel, etc. | |||
YL10.2 | K30 | 14.45 | 91.8 | 3000 | Wear resistance and strength comparatively higher,suitable for machining cast iron,non-ferrous metal and non-metallid materials. |
Size Specification for Tungsten Carbide Strips
If you need tungsten carbide strips, please advise the length, width and thickness.
Application range of Cemented Carbide plate/strips:
Used to make blanking dies. Used to make high-speed punching dies and multi-station progressive dies for punching and cutting copper, aluminum, stainless steel, cold rolled sheet, EI sheet, silicon steel sheet, hardware, standard parts, upper and lower punches and other thin sheets
Used to make wear-resistant tools. Such as tools for woodworking industry, plastic crushing tools, etc.
Used to make high temperature resistant parts, wear resistant parts, and anti-shielding parts. Such as the guide rails of machine tools, anti-theft reinforcement plates of automatic teller machines, etc.
Used to make corrosion-resistant parts for the chemical industry.
Used for radiation and corrosion resistant materials for medical equipment. The performance of different grades of cemented carbide is not the same, and the use should be specifically based on the use of the appropriate material to choose the grade of cemented carbide.
Zhuzhou Jinxin has a large stocking capacity and storage warehouse, and can provide large quantities of tungsten steel raw materials and some finished products in stock.