Tungsten alloy is the ideal material for counterweights. Firstly, because tungsten alloy counterweights are environmentally friendly and water-friendly, and because of their high density and the advantages of easy machining, tensile strength, and hardness, they keep the ship in balance and operate m

As an important refractory metal, tungsten has the highest melting and boiling points of all metals and the lowest vapor pressure of all metals, which is why it is used in aerospace, electronics, chemical, nuclear, and other extreme environments. We will now take a look at the properties and use of

Tungsten Rods, also known as Tungsten Carbide Rods, Tungsten Steel Rods, etc., are one of the carbide shapes, named for their long bar shape. Commonly used to make high wear-resistant parts on precision machinery and instruments, a tungsten carbide rod is widely used because of its high hardness and

Over the years, a great deal of work has been done on the thermal processing of Tungsten Rods. The effects of processing deformation and annealing regimes on the material properties and the mechanisms of reversion to recrystallization have been investigated in detail and many results have been obtai

Commonly tungsten alloy material mainly includes two series: WNiCu alloy, WNiFe alloy, other tungsten alloy with W-Ni-Cr, W-Ni-Mo, W-Ni-Co and other alloys. The application of these two alloys is wide and attracts people's attention. WNiFe alloys are more widely used due to their better tensile strength and ductility than WNiCu alloys. Followed by WCu, WNiMo, WNiCu. And other tungsten-based tungsten alloy material system, the composition of these tungsten alloy materials, the scope of application is to develop at a rapid rate.

Tungsten Rods possess special properties such as low thermal expansion with good thermal conductivity, sufficient resistance to resistance, and high modulus of elasticity. Tungsten Rods are therefore used in a wide range of applications. They are used in a wide range of applications such as support

Tungsten Rods, also known as tungsten alloy rods, are made from metal powders that are refined at specific high temperatures using special high-temperature powder metallurgy techniques. This gives Tungsten Rods a low coefficient of thermal expansion, good thermal conductivity, and good material prop

Tungsten Rods, with their good bending strength, high wear resistance, long service life, and wide range of applications. But do you know how a cutting tungsten carbide rod is made? What is the difference between it and tungsten gold? Here are some answers.Here is the content list:l Tungsten Rods ca

In the military field, the high density of tungsten alloy makes its performance more stable. Even in the very difficult natural environment and combat environment, tungsten alloy can still maintain its performance, shape, without distortion and effect.

Tungsten Rods Power and Power CalculationsTungsten Rods are dense, have an extremely high melting point, and are hard enough not to be easily corroded by air at room temperature. These dense metal rods can be boosted by a small rocket under satellite guidance and then coupled with free fall to creat